ENDING THE WATER SUPPLY: WHAT TO TURN OFF YOUR MAIN WATER VALVE

Ending the Water Supply: What to Turn Off Your Main Water Valve

Ending the Water Supply: What to Turn Off Your Main Water Valve

Blog Article

Try Here

The content listed below on the subject of How to Turn of is incredibly informative. Check it out for your own benefit and figure out what you think of it.


How to Turn off the Water for Plumbing Repairs
One of the most typical places a water main will be situated in house is in your boiler room, basement, or a removed panel in an area for your residence.
When you discover the water main you will merely transform the valve clockwise to close all the water off in your house up until you have actually finished the fixing. Some homes will certainly enjoy valve with a bar that you can draw rather than look to shut the water off.
If you try to close the water off to your components by using an angle stop and that does not work you will have to close of the water pipe to make your repair service. There are also numerous various other factors you may need to close the water main like repairing icy pipes, repairing leakages, changing components or faucets.
Many people are not mindful that they even have a water main valve right in their very own home and simply call a plumber of never ever wind up doing the repair service till things obtain truly bad since they simply do not know that shutting the water pipe is really simple.

How to Find and Shut Off Main Water Shutoff Valve


Where is the main water shutoff valve located?


This is the million-dollar question. Your main water shutoff valve could be located in several different areas. If you have a home with a basement and crawlspace, it is probably located on an interior wall near the front of the house, where the water comes in from the water meter. In this case, it is most likely hiding in plain sight. If your home was built on a slab, the valve might be located near the hot water heater or inside your garage.


How to Turn Off Main Water Valve


Once you find the shutoff valve you will either hand turn it (clockwise for gate valves and perpendicular to the pipe for ball valves) or use the appropriate tool depending on the design.


If it is located inside your house, it will most likely be a gate or “wheel” valve that you’ll simply turn clockwise to stop the flow of water. Another way to shut off the water is to go to the water meter box. Just be careful not to mess with the city shutoff side of the meter.


Where are the isolation valves?


Isolation shutoff valves are much easier to locate. Most essential home plumbing fixtures have separate valves that control the water flow. Sinks, toilets, water heaters, and washing machines should have a small valve located near the plumbing that can easily shut off the individual water supply.


Simply turning the valve clockwise will turn off the water flow. Sink and toilet problems can be dealt with quickly by simply shutting off the supply this way. It’s always good to test the isolation valves periodically to make sure they are working properly.



Again, once your tighten the water shutoff valves and turn off the water, open up your hot and cold lines to release pressure and test if the water is indeed off.



Make it a priority to locate the water valves in your home – and keep plumbing problems from turning into costly repair situations.

https://happyhiller.com/blog/how-to-find-shut-off-main-water-shutoff-valve/


How to Turn Off the Water in an Emergency

I stumbled upon that entry on How to Locate & Turn Off Main Water Shut-Off Valves while doing a lookup on the search engines. Appreciated our article? Please share it. Let other people find it. Thank you for your time spent reading it.


Schedule Now!

Report this page